WHY RAPIX
PHILOSOPHY
Lighting Control of Brilliant Simplicity
TEAM HISTORY
The team at Ozuno have extensive experience in the lighting control industry. Some of our team have been in lighting control for over 30 years; the young ones are still learning after only 18 years or so. We’ve been doing this a long time, and have developed several lighting control systems. We know dimming, lamps, loads, and electronics.
Designed, developed, engineered and supported right here in Australia.
SIMPLE - FAST - SECURE
Ethernet and DALI. No additional Bus Systems or Gateways required.
RAPIX is DALI-2
Historically, RAPIX systems included an Application Controller in every switch and sensor.
All RAPIX Application Controllers co-operatedwith each other to minimise DALI bus traffic, achieve useful functions, and create a highly resiliant system that tolerates and recovers from system component failures.
Instead of a total failure, a RAPIX system will continue to operate in a degraded form in the case of failure of a Zone Controller, or the ethernet infrastructure that links Zone Controllers.
With DALI-2 certification:
- RAPIX switches and sensors can be used in any DALI-2 lighting control system from any manufacturer;
- The RAPIX Zone Controller can receive EVENT commands from DALI-2 certified input devices from other manufacturers.
Mixing and matching system components brings a wide universe of sensors, switches and other products to RAPIX.
Of course when RAPIXÂ DALI-2 switches and sensors are use with a RAPIX Zone Controller, the legendary highly resiliant system behaviour of RAPIX is preserved.
SECURITY
AES Encryption
128 Bit AES Encryption and Authentication at its core. Out of the box security with the RAPIX DALI-2 Lighting Control Solution.
No Internet Services required.
Topology overview
Almost Endless Options and Integrations…
From Small to Large Projects and Everything In Between
Small Sized Project
All our RAPIX DALI Sensors and Switches have inbuilt applications controllers and can control any DALI, DALI-2 or DALI Type 8 light fittings.
The number of RAPIX DALI sensors or switches is limited only by available current from the DALI Power Supply.
RAPIX sensors have only 2 mA power consumption, helping to avoid the cost of extra DALI power supplies and cable runs.
Mid Sized Projects
Our RAPIX DALI-2 Zone Controllers allow you to create networks and supply you with advanced functions that allow you to talk from one DALI line to another.
Large Sized Projects
Whether it be an Office Tower, School, University, Hospital, Airport or Building Campus. RAPIX is fully scalable and secure.
FLEXIBILITY
Zones
A RAPIX Zone removes the limitations of DALI groups. It allows you to control any DALI address or group anywhere across your project. Zones can be controlled individually or together.
Scenes
A RAPIX Scene removes the limitations of DALI Scenes. It allows to create Scenes for any DALI address or groups anywhere across your project.
Any fitting, any group, can be set to any brightness value and triggered from any switch or sensor anywhere in the building.
Modes
RAPIX easily allows you to set different modes for different times of the day. Whether it be during hours, after hours, generator or cleaning modes, RAPIX provides you the freedom to customise to your clients requirements.
Hive Mind
Every RAPIX DALI-2 Zone Controller knows exactly what the other Zone Controllers are doing and each always carries a copy of the latest project database.
Emergency
All your DALI-2 Exit and Emergency Lighting from the one system. No need for additional Exit and Emergency infrastructure.
Hypothetical circadian lighting requirement for an office space
Circadian Lighting
Setup and configure your DALI Type 8 tuneable white and circadian lighting design to suit your environment.
Integrations
Built in JSON API for integrating to 3rd Party systems.
MODBUS TCP, MQTT and BACnet built in.
Additional interfaces via Eisbaer Scada.
Logic Engine
RAPIX now comes with an in-built C# Logic Engine for all those applications where you might want to get creative.
Visualisation and Reporting
DALI-2 Exit and Emergency Reporting. DALI-2 Luminaire Reporting. Device Diagnostics. Project Reporting. All your facilities maintenance requirements in a simple easy to use software.
FOR THE SYSTEMS INTEGRATOR
Ease of Quotation and Design
- Simply count all DALI light fixtures, emergency, sensors and wall switches
- Determine how many DALI lines are required per area
- Determine whether the project requires a lighting control system headend
Ease of Commissioning
- Simply scan your DALI line to identify all your DALI fittings and devices
- Go Mobile and address all your fittings, add them to a group at the same time
- Create schedules and scenes suited to your clients needs and requirements
FOR THE ENGINEER AND DESIGNER
Ease of Design and Specification
- Lighting and Controls all sit on DALI
- Ethernet Backbone for speed and reliability
- DALI Relays and Phase Dimmers for non-DALI requirements
- Out of the box 128 bit Encryption
- Integrations to 3rd Party Systems via BACNET, MODBUS, MQTT and our JSON API
FOR THE INSTALLER
Ease of Installation
- All lighting, emergencies, sensors and switches sit on DALI
- Less cabling requirements without the need for an additional dedicated bus
- Simple and easy to install guidelines to reduce potential wiring faults
- Significant cost savings in cable use by utilising DALI Relays and Phase Dimmers where required rather that located back in the distribution board
- Ethernet Backbone. No mixing and matching of different BUS systems
FOR THE BUILDING OWNER
Ease of Maintenance
- One Lighting System for all your general lighting and emergency
- Open Standard for the replacement of fittings from any suitable DALI lighting Manufacturer
- Preventative Maintenance reports to ensure your tenants satisfaction
- Scalable and easy to make changes for fitouts and refurbs.
- Safe, Secure and Encrypted
Head Office
Policies
Subscribe
Sign up to keep up to date on our latest product and software developments.