DALI Emergency LED Conversion Modules

Key Features

  • Input: 220 – 250 V ac 50/60 Hz
  • Output: self adapting to the load
  • Available in 2.5W and 5W versions
  • Drives a bi-coloured LED status indicator to show device status
  • Automatic self-test and show status when not connected DALI
  • A variety of rated durations are available including 1 / 2 / 3 / 4 hours
  • Supports the Australian AS 2293 requirement for 120 / 90 minutes
  • Can be wired to operate in Non Maintained or Maintained modes
  • Cable strain relief for Mains and DALI wiring
  • Fully compatible with the RAPIX Emergency Lighting Monitoring System
  • Complies with DALI standards IEC 62386-101, IEC 62386-102 and IEC 62386-202

Description

These DALI Emergency Conversion Modules allow almost any LED luminaire to be converted to an Emergency Luminaire.

When connected between a driver and luminaire, the Emergency Conversion Module allows the LEDs in the fitting to be operated normally when mains power is present. When mains power fails, the LED luminaire is powered from a battery and operated at a reduced light output.

Emergency Conversion modules can be mounted inside a luminaire or in a control gear housing. Because they include terminal covers, they can also be used as a separate emergency driver connected to a remote emergency LED light engine, with no need for an outer enclosure.

These fully DALI compliant DALI Emergency Conversion Modules also incorporate RAPIX Xi Extended Intelligence to provide additional features, functionality and information when connected to the RAPIX Emergency monitoring system.

Models are available in several power versions using Lithium-Ion batteries.

* Versions using Nickel-Cadmium (NiCd) or Nickel-Metal (NiMH) batteries are also available as a special order item. If these are required, please contact us.

Order Codes:

Lithium-Ion battery:

OZLCECM03CD1L2 – 2.5W output, 3.2V Li-ion battery

OZLCECM05CD2L2 – 5W output, 6.4V Li-ion battery

Documentation

Data Sheet

Scroll to Top