Close this search box.

RAPIX DALI-2 DIN Universal Switch Input (Isolated)

Key Features

  • DIN rail mounted, 4M wide
  • 6 inputs for switches or voltage free contacts
  • Each input is electrical isolated from the other inputs and from DALI
  • Each input suitable for very long cable runs (up to 250 m)
  • Many powerful functions possible on each input
  • Easily visible DALI indicator and identification indicator to allow locating the device during installation
  • DALI Line Powered, 6 mA current drawn from DALI
  • Configured using any DALI-2 commissioning software or the FREE RAPIX Addressing and RAPIX Integrator software tools
  • DALI-2 Certified to IEC 62386-101, -103 and -301


The RAPIX DIN mount Universal Switch Input is a DALI-2 Push Button Input Device with six inputs and built-in Application Controller. Each input is electrically isolated from the other inputs and from DALI. Inputs are suitable for very long wiring connection to switches or voltage-free (dry) contacts.

Each input can be configured for use with push-button momentary switches, toggle switches, or voltage free contacts typically found on motion / occupancy sensors. The input type can be configured using DALI commands.

DALI-2 Systems

This device is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.

RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reactions to be configured for switch or voltage-free contact inputs. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software, and when this is used the input type is automatically set depending on desired product operation, with over 20 possible functions that can be selected for each input. If a suitable function is not supported, Ozuno can create a custom function that is easily deployed using RAPIX Addressing or RAPIX Integrator software.

Control capability includes Short Addresses, DALI Groups, Broadcast, Scenes, RAPIX enhanced scenes, and more.

During operation, each input can be enabled or disabled based on a DALI Short Address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used, where Zones can comprise a mix of DALI short addresses, groups, or the DALI broadcast.


Data Sheet

Installation Guide


Scroll to Top

Register for news and notification of updates

Why Register?  Registering makes it easier to inform our customers and users about new updates and features.

We won’t fill your inbox with spam emails and we will never sell any mailing lists.