Universal input power supply, 12 V dc 1 A

Key features:

  • 1M wide DIN rail mounted universal voltage input DC power supply
  • Suitable for powering the RAPIX DALI-2 Zone Controller or RAPIX Ethernet DALI Interface
  • Input voltage range: 100 V ac .. 240 V ac  or  95 V dc .. 250 V dc
  • Input ac frequency range: 45 .. 65 Hz
  • Inrush current: < 15 A (typical)
  • Recommended breaker for input protection: 6 A .. 16 A (characteristics B, C, D, K)
  • Output: 12 V dc +/- 1%, 1 A
  • Operating Temperature range: -25°C .. 55­°C
  • May be connected in parallel for redundancy or increased capacity
  • UL listed and compliant to European, Australian and other world wide safety regulations
SKU DGLMPS12DC/1-0 Category

Description

A high quality universal input power supply with 12 V dc, 1 A output.

This power supply can be used to power the RAPIX DALI-2 Zone Controller or RAPIX DALI Ethernet Interface.

Power Supply Sizing Chart

We suggest power supplies are loaded to no more than 75% of its capacity – this allows a little headroom, for example to handle peak currents when a load starts.  Therefore, use a maximum of 750 mA of activate load currents. Pay attention to peak (start-up) currents and try to avoid exceeding 80% of the rated capacity.

For example:

ProductPowerNumberTotal PowerOK
Zone Controller200 mA3600 mAYES
Ethernet Interface100 mA (active)
200 mA (peak)
4400 mA (active)
800 mA (peak)
YES
Zone Controller
+
Ethernet Interface
200 mA
+
200 mA (peak)
2
+
2
600 mA (active)
800 mA (peak)
YES
Zone Controller
+
Ethernet Interface
200 mA
+
200 mA (peak)
3
+
1
700 mA (active)
800 mA (peak)
YES
Zone Controller
+
Ethernet Interface
200 mA
+
200 mA (peak)
1
+
3
500 mA (active)
800 mA (peak)
YES
Zone Controller
+
Ethernet Interface
200 mA
+
200 mA (peak)
2
+
3
700 mA (active)
1000 mA (peak)
NO
(Excessive start-up
current)
Scroll to Top