RAPIX eHub Dry Contact Coupler

Key Features

  • Up to 6 momentary dry contact inputs
  • Connects directly to a RAPIX eHub using common RJ45 patch leads
  • Powered by the RAPIX eHub
  • Optional connection to external status LED for each input (LEDs not supplied)
  • Each channel input includes a removable terminal block to assist installation and commissioning
  • Light and small, 100g (excluding removable terminal blocks), 138 mm x 63 mm x 31 mm
  • SELV only, no mains segregation requirements
  • Screw holes and slots for easy mounting or tie-down

Description

The eHub Dry Contact Coupler is used as part of a RAPIX Lighting Control System, allowing up to six external dry contact inputs to be used on a smart input channel of a RAPIX eHub.

All commissioning is done on the eHub, using either RAPIX Addressing or RAPIX Integrator software.

The device connects to a RAPIX eHub via a Cat5/6 cable and is powered from the eHub. Each of the inputs includes provision for an optional status LED; and behaviour of that LED is set as part of the commissioning process.

  • Suitable for use with Normally Open momentary switches only (push button momentary switches)
  • Not suitable for latched (toggle) switches
  • Not suitable for use with occupancy sensors (use the RAPIX eHub Sensor Multiplexor)

Documentation

Data Sheet

Brochure

Scroll to Top