RAPIX DALI Adaptive Phase Dimmer

The RAPIX DALI Adaptive Phase Dimmer is suitable for dimming up to 400 W of mains powered phase dimmable loads. DALI commands are translated to mains phase angle dimming. Typical loads are incandescent lamps, dimmable LED lamps, or dimmable CFL lamps.

A large space is included for terminating 1.5 mm2 or 2.5 mm2 double insulated cables for the 220 – 250 V ac mains supply cable, switched load output and DALI cable.

{altimage}
{altimage}
{altimage}

Dims almost all phase dimmable LED lamps, including hard-to-dim lamps where others struggle.

Features

Phase dimming of lighting loads from received DALI commands
Dimming for lighting loads up to 400 W, including most LED lighting loads
Draws under 2 mA from a DALI line
Two wire dimming device – no Neutral required, only 220 – 250 V ac Line (Active) and Load wiring
Suitable for mounting in a ceiling void or on DIN rail using a DIN rail mounting bracket (included)
Uses 1 DALI Short Address, and can be including in up to 16 DALI Group Addresses and/or up to 16 DALI Scenes
DALI Short Address, Group Addresses and DALI Scenes are configured using the RAPIX Addressing or RAPIX Integrator software.
Can also be commissioned using other DALI commissioning software that supports DALI Device Type 4
Complies with DALI standard IEC 62386 and Device Type 4

Order Code:

DGOZ-DM-400W-01 – DALI Phase Dimmer 400 W

Downloads

Datasheet

Related Products

Scroll to Top